Backup your Hard Disk Data and action Recovery
How to Backup your Hard Disk Data:
The data stored on your hard drive is the most critical part of your computer, which cannot be easily replaced. It may be an unwanted expense to repair and replace defective memory, monitor, or a processor, but there is no easy way to replace years of your critical data!
Inside view of Hard Drive (covers removed)
1. CD and DVD Writers:The falling prices of CD and DVD burners have made them a ‘essential’ part of just about every modern computer. These devices can typically be found installed in a computer case, but external devices supporting USB 2.0 or FireWire interface are available for greater flexibility, mobility and ease of installation.
The main limitation of using a CD writer for data backups is that the discs are generally limited to a capacity of 700MB per disc. Not nearly enough for a full backup, but adequate for archiving key files.
DVD media offers the user far more storage capacity than a CD, and most modern DVD burners can burn CDs as wells as DVD's. The recent availability of dual layer DVD burners represents a large boost in the capacity of writeable DVD's, taking the previous limit of 4.7GB per disc and nearly doubling it to 8.5GB.
With proper storage, CD/DVD media can provide long-term storage (life expectancy is about 40 years) that cannot be jeopardized by hardware failure. Most computers can easily read the data on a CD or DVD.
2. External Hard Drives:External hard drives are typically the same type of drive you might find inside your system, but housed in a smaller, external enclosure of its own. The enclosure will feature at least one data interface (such as FireWire or USB), and the capacity is only limited by the size of hard drives presently available and the user’s budget.
The capacity of external hard drives makes them ideal for backing up large volumes of data, and many of these devices simplify the process by including software (or hardware) features to automate the backup.
3. Additional Hard Drives (and RAID):By adding an additional hard drive to you system, you can protect yourself from data loss by copying your data from your primary drive to your secondary drive. The installation of a second hard drive is not’t difficult, but does require a basic understanding of the inner working of a computer.
To take the installation of a second hard drive to another level of security and reliability, the hard drives may be installed in a RAID array. RAID stands for a Redundant Array of Independent Disks, and can be configured in several manners. A RAID 1 array requires two hard drives of equal size to be installed on a RAID controller, which will then mirror one drive to the other in real time. Many motherboard's now come with RAID controllers onboard. With a RAID 1 array in place, if one hard drive should ever fail, the system won’t miss a best by continuing to run on the remaining good drive, and alert the user that one drive may need to be replaced.
4. Create your own Backup System:For those than already have or can afford an external hard drive, I highly recommend you read through this simple method of implementing your own backup
Hard Disk recovery and Rescue:
Common causes & symptoms of Data loss in Hard Disk Drives (HDD)
Possible causes & recovery cases
|Hard drive crash.
Inaccessible drive and partitions
Computer won't boot
Hard drive failed.
|Dead HDD. No spinning sound.||· Power surge, burned elements on
PCB (Printed Circuit Board)
· Stuck motor, stuck heads
· Mechanical failure, internal parts damage
|Drive spins with normal sound, no clicking.
The name of the drive could not be recognized by computer BIOS/CMOS.
|Damaged HDD Firmware microcode|
|Clicking Hard Drive||
Mechanical failure, internal parts damaged (especially heads)
|Normal spinning sound, drive can be recognized by computer BIOS/CMOS||Applications
are unable to run or load data.
Corrupt files/data, bad sectors.
Accidental reformatting of partitions.
Accidentally deleted files.
Normally, Software recovery is available for those symptoms.
are unable to run or load data. Corrupt files data,
Software recovery attempts fail =
|Damaged magnetic layer on the spinning platters (disks) is heavily damaged; Software recovery cannot be performed directly on the damaged drive.|
|Inaccessible drive and partitions.||Possible corrupted partition table data and / or master boot sector. Software recovery needed.|